Canadian owned and operated

Expert Oakville | Appliance Repair Services

Bosch Washer Error Codes

Request Your Services

Schedule your home appliance repair online – 24/7 availability

Why choose us?

Advantages of our Bosch Washing Machines Repair

If your Bosch washing machine has started acting up and bothers you, interrupting your comfortable life, it’s high time to call for help. Our repairmen are just a few blocks away and ready to come to the rescue.

Guaranteed Warranties

We provide warranties on all our repairs, giving you peace of mind with our services.

24/7 Service Availability

We offer round-the-clock service to ensure your appliances are fixed when you need them the most.

Convenient Booking

Schedule your service online 24/7 with our easy-to-use booking system, or call us directly.

Quality Parts & Workmanship

We use only genuine parts and back our repairs with a warranty for your peace of mind.

Bosch Washer Error Codes

Thankfully, modern devices can indicate the problem in different ways. For instance, Bosch washer error codes can tell its owner about various mishaps on its display.

Code

Error

Solution

Door is open

Reconnect one of the loose wires on the lock assembly wire harness. If the damage is found in wiring, it needs replacing. If the wire is all right, replace the lock assembly.

Too much foam

Restart the unit and adjust the detergent usage. If the error code persists, call a technician.

Excessive heating time (happens when the heater does not turn off)

Unplug the WM and inspect the heater for any possible damage. Unplug the washer and check the heater for visible damage. If the heater is defective, it may be shorting out to the metal cabinet, which might lead to the constant heating of the element. The damaged heater must be replaced as soon as possible. If the heater is all right, then there is a problem with the control module. Replace it because the relay responsible for the heater control might be stuck in the ‘On’ position.

Excessive water filling time

Verify that all supply valves located behind the WM are open. During cold seasons, it is recommended to inspect fill lines for freezing. Inspect the drain system for siphon troubles. In case of inlet valve assembly damage, replace it.

Excessive water filling time

Check if all supply valves located behind the WM are open. During cold seasons, it is recommended to inspect fill lines for freezing. Inspect the drain system for siphon troubles. In case of inlet valve assembly damage, replace it.

Excessive drain time

Make sure there are no clogs in the WM drain. If the system is clogged up, remove clogs from the hose. It is also recommended to unplug the WM to check the filter and the drain pump. Remove clogs if any or replace the pump if it’s damaged.

The WM shows the overfill level

If it shows the overfill level while the WM is not overfilled, a pressure switch might be defective. In this case, replace it as soon as possible. If the WM is really overfilled, shut off the water supply faucets, which are located behind the WM. In such a situation, the drain pump functions continuously to pump the water out. You need to unplug the WM and open supply valves. It the WM keeps filling with the water while being disconnected from the electric power source, the inlet valve assembly is to be replaced.

Excessive foam generation detected

Use the required amount of HE detergent. The majority of loads require just 1 tablespoon of detergent because of the reduced water level in the WM with the front load.

Problems with electrical power supply

Make sure the WM power cord is plugged in. If so, check the electrical outlet by plugging in a small appliance. If the outlet doesn’t function, call an electrician to repair it. If the outlet works correctly, unplug the WM and reconnect any loose wires on the control module. If the power cord/outlet plug is damaged, replace it.

Blockage of the door lock

The door lock coil might be overheated due to repeated attempts to lock/unlock the WM door. Inspect the lock assembly for any damages or objects, which might be stuck in the mechanism. If the lock assembly is damaged, replace it.

Code

Error & Solutions

Door is open

Reconnect one of the loose wires on the lock assembly wire harness. If the damage is found in wiring, it needs replacing. If the wire is all right, replace the lock assembly.
Too much foam

Restart the unit and adjust the detergent usage. If the error code persists, call a technician.
Excessive heating time (happens when the heater does not turn off)

Unplug the WM and inspect the heater for any possible damage. Unplug the washer and check the heater for visible damage. If the heater is defective, it may be shorting out to the metal cabinet, which might lead to the constant heating of the element. The damaged heater must be replaced as soon as possible. If the heater is all right, then there is a problem with the control module. Replace it because the relay responsible for the heater control might be stuck in the ‘On’ position.
Excessive water filling time

Verify that all supply valves located behind the WM are open. During cold seasons, it is recommended to inspect fill lines for freezing. Inspect the drain system for siphon troubles. In case of inlet valve assembly damage, replace it.
 
Excessive water filling time

Check if all supply valves located behind the WM are open. During cold seasons, it is recommended to inspect fill lines for freezing. Inspect the drain system for siphon troubles. In case of inlet valve assembly damage, replace it.
Excessive drain time

Make sure there are no clogs in the WM drain. If the system is clogged up, remove clogs from the hose. It is also recommended to unplug the WM to check the filter and the drain pump. Remove clogs if any or replace the pump if it’s damaged.
 
The WM shows the overfill level

If it shows the overfill level while the WM is not overfilled, a pressure switch might be defective. In this case, replace it as soon as possible. If the WM is really overfilled, shut off the water supply faucets, which are located behind the WM. In such a situation, the drain pump functions continuously to pump the water out. You need to unplug the WM and open supply valves. It the WM keeps filling with the water while being disconnected from the electric power source, the inlet valve assembly is to be replaced.
Excessive foam generation detected

Use the required amount of HE detergent. The
Problems with electrical power supply

Make sure the WM power cord is plugged in. If so, check the electrical outlet by plugging in a small appliance. If the outlet doesn’t function, call an electrician to repair it. If the outlet works correctly, unplug the WM and reconnect any loose wires on the control module. If the power cord/outlet plug is damaged, replace it.
Blockage of the door lock

The door lock coil might be overheated due to repeated attempts to lock/unlock the WM door. Inspect the lock assembly for any damages or objects, which might be stuck in the mechanism. If the lock assembly is damaged, replace it.

Our Process

Bosch Washer Problems We Solve

repair with our simple and efficient process. We guarantee top-notch service from start to finish, ensuring your appliances are back in working order with minimal disruption.

Our Process

Common Parts We Can Replace

repair with our simple and efficient process. We guarantee top-notch service from start to finish, ensuring your appliances are back in working order with minimal disruption.

Clients Review

Our Clients' Satisfaction is Important to Us

Luke Colman
Luke Colman
@lukecolman
I couldn’t be happier with the service I received! The technician was punctual, friendly, and very knowledgeable. My refrigerator was back to working perfectly in no time. The entire process was smooth and hassle-free, from booking the appointment to the repair itself. I highly recommend them for any appliance repair needs. They truly go above and beyond!
Freya Dean
Freya Dean
@freyadean
Excellent service! The team arrived right on time and quickly diagnosed the problem with my washing machine. They had all the necessary parts on hand and completed the repair efficiently. The pricing was transparent, and the technician even gave me tips on how to prevent future issues. I’m extremely satisfied and will definitely use their services again.
Joseph Nash
Joseph Nash
@josephnash
From start to finish, the service was outstanding. The booking process was easy, and they were able to accommodate my schedule. The technician was knowledgeable and explained everything clearly. My dryer is now working like new again, and I’m very impressed with the overall experience. I’ll definitely call them again for any future appliance repairs.
Satisfied Customers
280 +

Our Process

Our Locations

Repair with our simple and efficient process. We guarantee top-notch service from start to finish, ensuring your appliances are back in working order with minimal disruption.

Our Process

Our Locations

Repair with our simple and efficient process. We guarantee top-notch service from start to finish, ensuring your appliances are back in working order with minimal disruption.